Cleanroom consumables, manufactured by WIPESTAR · Shenzhen

Cleanspec Cleanroom consumables
  1. Home
  2. Supply
  3. Field note

Supply

Cleanroom Wipes Supplier: How to Qualify One

A two-week qualification route for cleanroom wipes suppliers: five documents, three lots, one clause. Written to be used on any supplier, including this one.

Cleanroom Wipes Supplier: How to Qualify One

Most supplier decisions start with a price list and end with a purchase order. The qualification that should sit between them is usually skipped, because it is not obvious what to ask and the answers all sound the same. They do not have to be. A cleanroom wipes supplier can be qualified in about two weeks, with five documents and three lots, and the result is a decision you can defend in an audit two years later.

This is the process we recommend to customers who are comparing us against an incumbent — including when the incumbent is better for their room. It is written to be used on any supplier, not just this one.

Specification sheet, test report and lot stamp laid out on a desk
The five documents that decide a supplier: specification, certificate of analysis, test report, material declaration, packaging drawing.

1. The supplier question is a documentation question

Two suppliers can ship a white 23 × 23 cm polyester wipe that looks identical on a bench and behaves nothing alike in a cleanroom. The difference is not visible in a photograph; it is in the construction record, the test method and the lot history. So the first question is not "what is your best price" but "what can you send me in writing, today, without a sales call".

A supplier that cannot produce a specification sheet with a revision number is not necessarily a bad supplier, but it is a supplier whose product you cannot control. Specification control is the whole point of buying consumables in a regulated room.

2. The five documents to request before a sample

  • Specification sheet, with revision — construction, basis weight, dimensions, edge, fold, pack count, sterility state. Undated or unversioned sheets are a warning.
  • Certificate of analysis for a recent lot — not a template, an actual lot. Check that the tests named on it are the tests you care about, and that the values are numbers rather than "pass".
  • Test report for the methods cited — particle count, fibre release, extractables, sorption. If the certificate cites IEST-RP-CC004, the report behind it should exist. See what those methods actually measure.
  • Material declaration — fibre composition, binders, and any latex or silicone content. This is what your own customer questionnaire will ask you for later.
  • Packaging drawing — bag material, bag count, carton dimensions, label position. Most incoming inspection failures are packaging failures, not product failures.

Ask for all five at once, as a single request, and note how long they take to arrive. The response time to that email is the most accurate predictor of how the supplier behaves when a shipment is late.

3. A sample protocol that compares something

Free samples are marketing. A sample protocol is a test. To compare two suppliers fairly, control five variables: the same surface, the same solvent at the same concentration, the same wipe technique, the same operator, and the same measurement.

  • Request three lots, not one. Lot-to-lot variation is the failure mode a single sample cannot show.
  • Wipe a defined area — 30 × 30 cm is enough — with a counted number of passes, and photograph the surface under raking light before and after.
  • Weigh the sheet before and after to see how much solvent it holds and how much it gives back.
  • For critical surfaces, run a residue check: a white gloved finger or a clean lens tissue across the dried area will show what the wipe left behind.
  • Record the operator. Two people using the same wipe produce different results, and that is itself a finding.

The output is not a winner. It is a shortlist of two references that behave predictably, which is what you actually need before writing a specification a supplier can quote against.

StageWhat to checkPass criterion
DocumentsFive documents, versionedAll received within 5 working days
SamplesThree lots, same referenceConstruction and pack count identical across lots
Line trialDefined area, counted passesNo visible residue under raking light
PaperworkCoA versus spec sheetEvery quoted value traceable to a method
Change controlWritten notification clauseSupplier commits to notice before a change ships

4. The five places specification drifts

The reference you qualified is rarely the one that arrives in year two. It drifts, quietly, in five places:

  1. Sub-tier change. The nonwoven supplier changes, the brand on the carton does not. Ask how sub-tier changes are notified.
  2. Edge finish. A cut edge becomes a lightly sealed one, or the ultrasonic weld is replaced by heat sealing. Both are "improvements" until your particle count moves.
  3. Pack count. 300 sheets becomes 280 with the same carton. Nobody notices until someone counts.
  4. Basis weight. A 68 GSM cloth at 65 GSM still passes a visual check and still feels the same in the hand.
  5. Sterility release. The sterilisation partner changes, or the barrier stack loses a layer to save cost.

All five are preventable with one clause in the supply agreement: no change to construction, packaging or sterilisation without written notification and a new lot qualification. If a supplier resists that clause, that is your answer. Our own position is written into the quality and documentation page, including the change notification process.

5. Single source, dual source, and what a second supplier is for

A second supplier is not a price lever; it is an interruption plan. The useful question is not "who else can make this" but "if my main line stops for six weeks, what do I run in the interim, and what would I have to re-qualify". Answering that before you need it is the difference between a substitution and a deviation. We wrote the mechanics separately in qualifying a second source without full re-validation.

6. What a good first order looks like

Small, documented, and boring. One case of the chosen reference, a full document pack, a lot number recorded in your system, and an incoming inspection against the specification sheet you qualified. If that goes well, the second order is a reorder rather than a decision — which is the point of the whole exercise.

If you are at the comparison stage now, send the application rather than the part number: surface, solvent, cleanroom class, and monthly draw. The answer will be a shortlist, not a catalogue. Send the details.

Questions that come up before an order

How long should supplier qualification take?

Two to three weeks for a stock reference if the supplier has its documents ready: one week for paperwork, one for samples, one for a line trial and the decision. Sterile references take longer because the sample usually has to come from a released lot.

Do I need to audit the factory?

For a stock reference in ISO 7–8 work, a documented questionnaire plus a video walk-through of the line is usually proportionate. For sterile supply or a private-label programme, an on-site audit before the first run is normal practice.

Is the cheapest qualified supplier the right one?

Usually not. Price differences of 20–30% between qualified suppliers are common and are often absorbed by consumption differences, not by quality. Compare cost per clean square metre rather than cost per case, as set out in the arithmetic behind a wipe change.

What if the supplier is a trader rather than a manufacturer?

It can still work, provided the trader controls the specification and can name the converting site. The risk is that they cannot answer a technical question without going back to the factory, which slows every future change and hides every sub-tier move.

Ethan

Written by

Global Sales Director

Since 2014 · stock, sterile and private-label programmes, Incoterms · Shenzhen commercial desk

Written from specification reviews, incoming inspection records and line trials by the Cleanspec desk in Shenzhen. Questions about a specific room are answered directly — send the details.

Call the desk Request a quote