A 1.2 m sock that floats and repels water, for containing oil on floors, bunds and water surfaces.
Selection note
A 1.2 m sock, 8 cm diameter, 12 to a box. Socks are for containment, not cleanup: ring the spill first, then lay pads inside the ring. Oil-only construction means the sock floats and keeps the spill from reaching a drain while the pads do the absorption.
Construction
Oil-only media absorbs hydrocarbons while repelling water, so the sock keeps working in wet conditions instead of becoming saturated with the wrong liquid. The 1.2 m length can be bent around drains and machine feet.
Where it is used
- Bunding around drums and IBCs
- Drain protection
- Machine base leaks
- Oil sheen on coolant tanks
On the line
Join socks end to end by overlapping the ends, not by taping the middle. A sock that kinks at a joint leaves a gap exactly where the liquid arrives first.
Release check
Release check: absorbency rate, retention under load, dust level and weight class against the certificate. A pad that releases liquid when lifted has failed the only test that matters at the point of use.
Handling notes
Socks are a containment measure, not a drain seal. For emergency drain protection, use a dedicated drain cover as well.