A chemical-grade pad for acids, bases and aggressive solvents, where a universal absorbent would degrade.
Selection note
Chemical pads in grey, 40 × 50 cm, 200 to a box. The colour is the control: chemical absorbents stay separate from oil and universal stock so a responder does not have to read a label at the moment of a spill. Confirm compatibility with the specific acid or caustic before use.
Construction
Chemical-grade polypropylene resists a broader range of aggressive liquids than the universal grade. The pad is designed to hold the liquid without reacting, so cleanup does not create a second hazard.
Where it is used
- Laboratory spill kits
- Acid and caustic transfer areas
- Solvent drum bunding
- Battery and plating rooms
On the line
Chemical pads are not a universal substitute. Check the compatibility sheet for the acid or caustic in use, and never use a pad that has absorbed an oxidiser on a spill of a different chemistry.
Release check
Release check: absorbency rate, retention under load, dust level and weight class against the certificate. A pad that releases liquid when lifted has failed the only test that matters at the point of use.
Handling notes
Always check the SDS of the spilled chemical against the absorbent specification. Unknown mixtures should be treated as hazardous waste.